Audi S2 Coupe Project-More Catching Up

By this time, I had also acquired some other parts as well. I got a full set of Powerflex control arm bushings, H&R springs, and Bilstein strut inserts. These parts sat on my garage shelf for quite a few years, but have recently made it onto the CQ. Parts storage…

I picked up a nice red rear S2 bumper from a_cq (Petar) and ended up getting a Reiger RS2 replica from somewhere that I can’t remember now.

I got a set of the 993 duct/turn signal/fog light sets from eBay for pretty cheap.

Then I started going crazy with the offerings from 034. Here are some of the goodies that I bought around the fall of 2007…

Block Breather Hose (to replace that gooey mess of a thing below)

Rear Diff. Mount (this had to be modified a bit to work)
I had read about people cracking the mount because of the fit and it seems that it came down to them having to make it oversized to work in all cases knowing it is easier to remove material from the bushing than it is to add it if it isn’t there. So I took a little bit from the boss diameter…